You are currently browsing the tag archive for the ‘vanilla’ tag.

I’ve kind of been taking a break from baking. It hasn’t been intentional, it’s just the way the cards have landed lately. Between my car getting totaled (without me in it, luckily!), finding mold in my apartment, dealing with job stress, dealing with TMJ issues, dealing with more job stress and now, finally, apartment hunting… you could say I’ve been a bit preoccupied.

Even with my world spinning slightly off of its axis, I’ve managed to squeeze in a few different cakes/ cupcakes since my last post. Here’s what y’all missed:

whimsical college graduation cake

My good friend from college asked me to do a graduation cake for her younger sister. Within this cake, she asked for a variety of elements to be included. See if you can find them all: a grad cap, UC Davis colors, Banghra (Punjabi) dancing, elements of “college life,” and something relevant to dental school. This cake was a challenge, but very fun and every bit of whimsical as I’d hoped it to be!


25th birthday cupcakes (1 of 2)

bootie cupcakes (2 of 2)

In January, my friend R threw herself one hell of a 25th birthday party. She asked me to provide a variety of treats including 2 types of cupcakes (shown above), a few trays of chocolate whoopie pies and 1 large cupcake cutting cake. The vanilla cupcakes were topped with a marshmallow cream frosting, and decorated with handmade chocolate accents and edible glitter. The red velvet cupcakes were frosted with a thick swirl of classic cream cheese frosting and decorated with fondant butts.

Yes, butts. You heard me right. When I accepted this order, R had mentioned that she’d been working out really hard for the last year or so, and wanted everyone at her party to, “have a piece of my ass!” I love her confidence, enthusiasm and the fact she’s so secure in her own skin! You go girl!

PS – These toppers would be great for a bachelorette party too… 🙂


TokiDoki birthday cake

In March, my buddy G asked for a couple of cakes. For his wife’s birthday, he asked for a small, super chocolatey cake. He mentioned that TokiDoki is one of her favorite things, so I did some research and designed a simple cake with hand cut fondant TokiDoki accents.

Two of his friends also happened to have a birthday during the same week, so he asked for a casual cake for the guys to take on a weekend trip. I knew that this group of guys were all die hard Giants fans, so I couldn’t resist surprising them with a hat cake. Just like my earlier hat cakes, it was decorated in fondant with hand cut accents.

Giants hat cake


My cousin, M, is an incredible kid and I was super excited when her mom asked me to do her birthday cake a couple weeks ago. Along with the cake, she was going to be surprised with new archery equipment for her birthday. I designed the cake to go along with her fabulous birthday present, making the archery target out of fondant and the arrow out of gumpaste.

archery-themed birthday cake


A couple of weeks ago, one of my neighbors emailed and asked if I could do two dozen chocolate cupcakes for one of her employee’s birthdays. She requested the cupcakes to be as chocolatey as possible, and decorated in a “dog” theme. These hand cut fondant decorations might be my favorite cupcake toppers to date!

birthday "pupcakes"


The world is full if amazing cake sculptors and designers and shows like Ace of Cakes and Food Network Challenge prove that there is little that cannot be made of cake.

For my Grandpa’s memorial services last month I decided that a cake shaped like a baseball cap would be a fitting tribute to the person that never went anywhere without one. Here’s the steps I took to make the hat cake – enjoy!

How to Make a Hat Cake

1. Bake your cake. You’ve got a couple of options with this one. I chose to bake the cake in 3 layers and then carve it into the shape of a hat. However, if you’re not comfortable with the idea of carving you can definitely bake one layer in the base of a metal mixing bowl and use that rounded piece as the top layer.

Baking awayyyy: 3 8" layers will probably take about 45 min.

If you bake all the layers at once (like I did), you’ll have a bit of time on your hands. I used this time to get my buttercream together and clean up my workspace… you’ll be a lot happier if you do the same. 🙂

3 layers - baked and filled

Once the layers have cooled, fill them with your choice of a filling. I used a Swiss Meringue Buttercream for stability, but you could use a ganache or cream filling if you wanted.

2. Carve your cake. It’s a bit intimidating trying to turn a traditional 3-layer cake into a baseball hat, but trust me, you can do it! A couple tips to get you started:

  1. Have a “model.” Lucky for me my boyfriend has the biggest hat collection on the planet. I swiped one of his to use as a reference point.
  2. Freeze the cake. I know, I know… freezing a cake is a cardinal sin in the world of baking and decorating. But honestly, if this is your first time carving a cake you’ll be GLAD you did! If you choose to freeze your cake, wrap it really good with saran wrap (to prevent it from drying out) and pop it in the freezer for 30 minutes – 1 hour. Freezing the cake just makes it easier to work with, and most people can’t taste the difference.
  3. Don’t crumb-ice before carving. I know this tip sounds really “duhhh,” but I honestly forgot and crumb-iced prior to carving and ended up cutting off ALL of the icing I had used. Save yourself time AND frosting, and don’t crumb-ice before. 🙂

My hat and my model.

Start with the top of the layers and carve down at an angle in order to give your cake a dome top. You’ll be cutting off most of the top layer, and the edges of the bottom two. Make sure to make your angled cuts very pronounced, because otherwise you won’t see them once you cover the cake in fondant.

For the baseball hat, make sure to make some “V”-shaped cuts in the top to account for rumples in the hat. Also, carve out a small hole in the back of cake to mimic an adjustable hat. This hole should be at the very bottom of the cake, and about 2″ wide by 1 1/2″ deep.

Again, make all the cuts extremelyyy pronounced. Your cake should end up being about 7 3/4 – 8″ wide (depending on how much you carve off of the sides), and about 4 – 4 1/2″ tall.

What your carved cake should look like.

3. Crumb-ice the cake. After your carving work is done, cover the cake in a thin layer of buttercream. Crumb-icing, dirty icing, crumb coating… it doesn’t matter what you call it, but just make sure you do it. This coat of buttercream gives the fondant something to stick to, and also gives you the opportunity to smooth out any problems you might have run into during the carving process. Once your cake is crumb-iced, pop it in the fridge for 20-30 minutes to firm up.

In the meantime get started loosening up your fondant! You can use pre-tinted fondant, or color your own using gel food colors. You’ll need about a pound, maybe a bit more, to cover and decorate the cake. When tinting the fondant, be mindful of your hands. You can use plastic gloves, or coat your hands with a thin layer of shortening. The shortening won’t keep all of the color off of your hands, but it will help keep them mostly clean. Also, it is possible to ‘overwork’ the fondant and dry it out, so keeping shortening on your hands helps with that too.

4. Cover the cake. You can cover the cake in any medium you like – fondant, buttercream, marzipan, etc. I chose to use fondant for a couple of reasons: 1) it offers a beautifully smooth finish (when you apply it right), and 2) it seals the cake really well and helps to keep it fresh.

Roll out your fondant to about 1/4″ thick. You can make it a little thinner than that, but know that thin fondant is prone to tears, and tears are impossibly hard to fix!

Once you’ve reached the proper thickness roll 1/2 of the fondant back on your rolling pin, lift it up and gently place it over the cake.

Working quickly (but carefully!), lift and smooth out the fondant all around the cake. This, my friends, is a LOT harder than it sounds. Remove all of your rings, and be mindful of your nails as they can snag the fondant and cause unnecessary ruckus. Cut away excess fondant as necessary… the excess fondant will pull down and create wrinkles in the finished product.

Sorry that I don’t have any photos of this step. I was the only person at home & couldn’t cover a cake and photograph at the same time!! Gosh, Caty… 🙂

Here’s the final photos and you can see what I mean about working with fondant. I’ll admit, covering the green hat was MUCH easier than covering the blue hat, and I think it shows.

Top of the Oakland hat.

(Re) Covering the Dodger cake.

5. Decorate the hat! Keep your model on hand for this part, as there are a several details on the hat that you don’t want to overlook.

1. The bill. In order to make the bill of the hat I traced an outline on to cardboard and covered it in fondant. While the fondant was drying, I sort of curved the bill to give it some shape, and added stitching details. Be mindful of the proportions… the Oakland bill looks a bit off, but the Dodger bill looked much better.

The slightly awkward bill.

Better proportions... ignore the shoddy fondant.

2. The stitching. Wilton makes a nifty little roller tool that happens to have a piece that, when used, looks exactly like fabric stitches! Use this to create stitching on the bill, and to create the seams along the top of the hat.

See the stitches?

3. The rivets & button. Look at the top of your model hat and note where the rivets are. Then using 2 different pastry tips make one outer ring and one inner ring. I believe I used a #4 for the outer ring, and a #2 for the inner ring. Also, roll a small ball out of fondant & flatten it slightly. Attach it to the center of the hat (on the top) with a light brushing of Vodka or lemon extract. Should look like this:

Rivet-ing... bahahaha!

4. The Adjustable Strap. Remember that hole I made you cut out of the cake wayyyy back in step 2? Now it’s time to put it to work. Roll out a short piece of fondant that’s about 1/2″ wide, and make holes in it the same way you made the rivets. Cut one end of it in a curved shape, and attach it to the cake with… yes, you’ve guessed it… Vodka!

The adjustable strap!

Another view...

5. Logos. Often times colors are a dead giveaway, but the one thing all hats have in common is a logo! For the Oakland hat I simply cut out an oval-shaped piece of fondant and piped the acronym “OAK” on the front. The Dodger hat was a little different… I printed out a picture of the LA logo, cut it out, and placed it over my fondant. Then, using an Xacto Blade, I carefully cut the logo out of fondant and attached it to the front of my hat with a brushing of Vodka.

Note: I’m not that much of a lush. There are only 2 liquids that will allow you to attach 2 pieces of fondant together: Vodka and lemon extract. I happened to be out of lemon extract which is why I was using Vodka.

Beat LA!

6. The Presentation. After you’ve put in all this work creating a fabulous cake you still have to consider one more thing… the presentation. I’m not the hugest fan of foil-covered cake boards, but you can use them if you like. You can also cover a board in fondant which is what I did for both cakes.

Fondant covered cake board.

Fondant covered board with baseball cupcakes to match!

And there you have it! That’s the rundown on how to create a hat cake! I hope you’ve enjoyed the tutorial… feel free to leave questions or comments if you have any.

My great grandpa was one of the kindest people you would ever hope to meet. He was always available for hugs and laughs, and always showed up at every basketball game. Unfortunately the past couple of years weren’t too kind to him, and he passed away on July 1st after battling dementia.

Miss you Grandpa!

We all knew it was time to for him to go, so rather than make his passing a depressing event my mom & Auntie decided to throw him a birthday party instead. (His birthday was August 10th) This weekend I’ll be traveling up north to my hometown to celebrate Grandpa’s birthday and his life with several members of my family and our friends.

You definitely can’t have a birthday without cake, so my mom asked if I wouldn’t mind baking some treats for the party. After a few weeks of deliberation I finally decided that I was going to do a bunch of cupcakes with a smaller cake sitting on top of the tower. Grandpa was a huge sports fan, so I decided that a ball-cap shaped cake decorated to support the LA Dodgers (ew!) would be a fitting tribute.

I did quite a bit of research and found that there are two ways to make a hat cake. You can either bake it in an oven-proof bowl, or use 1/2 of a ball-shaped pan. Or, you can carve down a 3 layer round cake. Since I own neither an ball-shaped pan or an oven-proof bowl, I opted to carve down a 3 layer cake.

At this point let me inform you that it is no where near easy to carve a 3 layer round cake (with a flat top!) into something that is shaped like a baseball hat. It takes a lot of guessing and hoping and re-reading of all the tutorials that you’ve already read 27 times.

In the end you get something that, if you imagine hard enough, kind of looks like a hat. Then, you mix together a bunch of leftover pieces of fondant and realize that it somehow turns into the same color green as the Oakland A’s rock for away games. And then you start to get excited for what could be…

Let's Go Oakland!

The creases were tricky. I'll tell you how to do that later...

Details are crucial!

My muse. ❤

Not too bad for the first try, right? There’s definitely some things that I’ll keep in mind for when I make this cake again on Friday. Notably – the bill. That’s one detail that would be best created out of gum paste to give it a bit more shape. Also, I need to make sure I attach the bill properly so that it doesn’t look too big for the hat. Definitely a lot of lessons learned, but a successful practice run overall!


Mah Tweets

Error: Twitter did not respond. Please wait a few minutes and refresh this page.

Past musings